// EE027 · Trailer aftermarket part

Drake-Compatible LRG NYLON Thrust Washer

Direct-fit aftermarket replacement, machined from Natural Nylon at the Enex workshop in Malaga, Perth WA. Made to original equipment spec — no rework, no spacer kits.

This washer sets the spacing, alignment and end-float that keep a trailer joint running true - it locates components and takes thrust so they don't wander or bind. It takes axial thrust and sets the end-float in the joint. Worn or crushed, it lets parts move where they shouldn't. EE027 restores the correct dimension. Confirm fit by sending your worn part, photo or dimensions.

Pricing on request

Quotes returned in 24-48 hours · Volume discounts at 10+

Enquire · Malaga WA

Request quote → Email a photo

Quote requests typically returned within 24-48 HOURS. Australia-wide freight.

Part number: EE027
Application: Heavy-haulage trailer aftermarket
Material: Natural Nylon
Dimensions: Confirm at quote stage — cut to your trailer model
Country of origin: Made in Australia
Lead time: Enquire — confirmed at quote stage

// What it does & how it wears

Signs it needs replacing

Spacers, sleeves and washers wear quietly. Look for end-float or sideways play that wasn't there before, fretting or bright rub marks on the faces, a crushed or stepped profile, or components that no longer sit square. Renewing them is cheap insurance against accelerated wear in the pins and bushes they locate.

Made from Natural Nylon - light, quiet and self-lubricating - it won't corrode or pick up grit, which makes it ideal for a low-maintenance wear bush.

// Why EE027

What you get

Direct fit — machined to original equipment spec, no rework
Natural Nylon — same material grade as the original
Made in Malaga — Perth-based workshop, weekly direct freight to WA mining hubs
Quote in 24-48 hours — send the part number, we'll come back with availability and lead time

// Compatibility check

Will it fit your trailer?

If you're unsure EE027 matches your worn part, photograph it with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Email a photo for fit check See all trailer parts

// Related parts

Often ordered together

// FAQ

Buyers ask about EE027

What's the lead time on EE027?

Lead time varies by current production load. Send the part number and we'll come back with current availability and lead time within 24-48 hours. Australia-wide freight, tracked door-to-door.

Can I order EE027 in bulk for a fleet?

Yes. Volume pricing applies at 10+ units. Email contact@enexengineering.com.au with your fleet sheet for a tailored quote.

Is EE027 made in Australia?

Yes. Machined at the Enex workshop in Malaga, Western Australia, from materials supplied through Australian distributors.

Can you make these in different thicknesses?

Yes. Spacers, shims and washers are routinely cut to a range of thicknesses to dial in the correct end-float. Tell us the gap you need to take up and we'll machine to suit.

Can you match an odd or worn size?

Yes. Send the worn part or the measurement and we'll machine to match - including non-standard thicknesses that are hard to buy off the shelf.

How do I confirm it fits my trailer?

Photograph the worn part with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Drake-Compatible LRG NYLON Thrust Washer

Signs it needs replacing

What you get

Will it fit your trailer?

Often ordered together

Nylon Rocker Axle Bush

Nylon Axle Trunnion Bush

Nylon Axle Trunnion Washer

LRG MS Top Thrust Washer

Buyers ask about EE027

Need EE027? Send your part number, we'll come back with lead time.