EE058 — Enquire for Availability/ Quote in 24-48 Hours/ Direct-Fit · Machined to Original Spec
Call Now Get a Quote →
EE058 — machined aftermarket part
// EE058 · Trailer aftermarket part

Drake-Compatible Spigot Pin Brass Bush

Direct-fit aftermarket replacement, machined from LG2 Bronze at the Enex workshop in Malaga, Perth WA. Made to original equipment spec — no rework, no spacer kits.

A bush is the sacrificial wear surface between a pin and its housing - it is designed to wear in place of the expensive parts around it. It locates on the spigot to keep the mating parts concentric. As it wears it goes oval and the joint develops play. EE058 restores the original bore so the pin runs true again. Confirm fit by sending your worn part, photo or dimensions.

Pricing on request

Quotes returned in 24-48 hours · Volume discounts at 10+

Enquire · Malaga WA
Request quote → Email a photo

Quote requests typically returned within 24-48 HOURS. Australia-wide freight.

Part number
EE058
Application
Heavy-haulage trailer aftermarket
Material
LG2 Bronze
Dimensions
Confirm at quote stage — cut to your trailer model
Country of origin
Made in Australia
Lead time
Enquire — confirmed at quote stage
// What it does & how it wears

Signs your bush is worn

A worn bush shows up as play and knocking in the joint, a pin that has started to score, grease that won't hold, and movement you can feel when you lever the components. Replacing a cheap bush early protects the pin and the housing bore - leave it and you're machining or replacing far dearer parts.

Made from LG2 Bronze - a proven low-friction bearing material that runs against a steel pin and wears in preference to it, so the pin and housing last longer.

// Why EE058

What you get

  • Direct fit — machined to original equipment spec, no rework
  • LG2 Bronze — same material grade as the original
  • Made in Malaga — Perth-based workshop, weekly direct freight to WA mining hubs
  • Quote in 24-48 hours — send the part number, we'll come back with availability and lead time
// Compatibility check

Will it fit your trailer?

If you're unsure EE058 matches your worn part, photograph it with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Email a photo for fit check See all trailer parts
// Related parts

Often ordered together

EE008 SML LG2 Trunnion Washer
EE008

SML LG2 Trunnion Washer

LG2 Bronze Hollow Bar.
EE022 Bell Crank Bronze Bush
EE022

Bell Crank Bronze Bush

LG2 Bronze Hollow Bar.
EE024 LRG LG2 Thrust Washer
EE024

LRG LG2 Thrust Washer

LG2 Bronze.
EE057 Spigot Pin Straight Knurling
EE057

Spigot Pin Straight Knurling

1045.
// FAQ

Buyers ask about EE058

What's the lead time on EE058?

Lead time varies by current production load. Send the part number and we'll come back with current availability and lead time within 24-48 hours. Australia-wide freight, tracked door-to-door.

Can I order EE058 in bulk for a fleet?

Yes. Volume pricing applies at 10+ units. Email contact@enexengineering.com.au with your fleet sheet for a tailored quote.

Is EE058 made in Australia?

Yes. Machined at the Enex workshop in Malaga, Western Australia, from materials supplied through Australian distributors.

Why replace the bush instead of the whole assembly?

The bush is meant to be the sacrificial part - it is far cheaper to renew than the housing or casting it sits in. Replacing it early is exactly how you avoid the big repair.

Can you supply the matching pin too?

Yes. We machine pins and bushes as a set so the fit is right from the first load cycle. Send both worn parts and we'll quote the pair.

How do I confirm it fits my trailer?

Photograph the worn part with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Need EE058? Send your part number, we'll come back with lead time.

Request quote →