// EE072 · Trailer aftermarket part

Drake-Compatible Ramp Lift CYL Pin Bush — 1.25"

Direct-fit aftermarket replacement, machined from E470 Hollow Bar at the Enex workshop in Malaga, Perth WA. Made to original equipment spec — no rework, no spacer kits.

This cylinder pin bush works on the ramp, dolly and hydraulic gear - high-cycle, high-load duty where a worn pin or bush quickly turns into slop in the lift. It works in the ramp-lift gear under high, repeated load. EE072 restores the original fit so the ramp or cylinder operates tight and true. Confirm fit by sending your worn part, photo or dimensions.

Pricing on request

Quotes returned in 24-48 hours · Volume discounts at 10+

Enquire · Malaga WA

Request quote → Email a photo

Quote requests typically returned within 24-48 HOURS. Australia-wide freight.

Part number: EE072
Application: Heavy-haulage trailer aftermarket
Material: E470 Hollow Bar
Dimensions: Confirm at quote stage — cut to your trailer model
Country of origin: Made in Australia
Lead time: Enquire — confirmed at quote stage

// What it does & how it wears

Signs it needs replacing

Ramp, dolly and cylinder parts cop heavy, repeated load. Look for play or slop in the ram and ramp pivots, scored or ovalled pins, bushes that have opened up, and lift movement that has gone sloppy or jerky. Renewing the pin and bush together takes the slack out and keeps the geometry right under load.

Made from E470 Hollow Bar - a clean seamless hollow-bar stock that machines true and gives a stable, consistent bore for sleeves and bushes.

// Why EE072

What you get

Direct fit — machined to original equipment spec, no rework
E470 Hollow Bar — same material grade as the original
Made in Malaga — Perth-based workshop, weekly direct freight to WA mining hubs
Quote in 24-48 hours — send the part number, we'll come back with availability and lead time

// Compatibility check

Will it fit your trailer?

If you're unsure EE072 matches your worn part, photograph it with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Email a photo for fit check See all trailer parts

// Related parts

Often ordered together

// FAQ

Buyers ask about EE072

What's the lead time on EE072?

Lead time varies by current production load. Send the part number and we'll come back with current availability and lead time within 24-48 hours. Australia-wide freight, tracked door-to-door.

Can I order EE072 in bulk for a fleet?

Yes. Volume pricing applies at 10+ units. Email contact@enexengineering.com.au with your fleet sheet for a tailored quote.

Is EE072 made in Australia?

Yes. Machined at the Enex workshop in Malaga, Western Australia, from materials supplied through Australian distributors.

Do you supply the cylinder pin and bush together?

Yes. On ramp and cylinder joints the pin and bush wear as a pair - we machine them together so the fit is correct from the first lift cycle.

Can you match imperial sizes?

Yes. Many ramp and cylinder pins are imperial (1", 1 1/4" and so on). Send the worn part or the size and we will machine to match.

How do I confirm it fits my trailer?

Photograph the worn part with a tape measure across the critical dimensions and email contact@enexengineering.com.au. We'll confirm fit before you commit.

Drake-Compatible Ramp Lift CYL Pin Bush — 1.25"

Signs it needs replacing

What you get

Will it fit your trailer?

Often ordered together

Split Collar Bush

70mm Pin Spacer

Spigot Sleeve

Ramp Lift CYL Pin Bush — 1"

Buyers ask about EE072

Need EE072? Send your part number, we'll come back with lead time.