Two-axis CNC turning for shafts, bushings, flanges and rotational components in 4140, stainless, bronze and aluminium. Tolerances to ±0.01mm. One-offs welcome — there's no minimum order. Quotes back in 24-48 hours.
If it spins, we turn it. Most weeks the lathes run a mix of mining wear parts, hydraulic shafts, valve internals and aftermarket trailer pins for the spares catalogue.
Hard-chromed and ground rods, machined ends, threaded eyes. 4140 PG bar to spec. Tolerance ±0.02mm on bore concentricity, ±0.01mm on bearing journals. Common for mining cylinders and tipper hoists.
Hanger pins, king pins, equaliser pins, rocker pins, tailgate pins. Bronze C932 and C954 bushings. Direct-fit replacements for heavy-haulage trailers and reverse-engineered for OEM-obsolete fleets.
Crusher hammers, screen pins, conveyor pulleys, bushings for screen panels. Heat-treat-and-temper through partner shops. EN 10204 mill certs on every job for traceability into the customer's QMS.
Three CNC lathes plus a manual lathe for prove-out and one-off rework. Read this like a data sheet — not marketing. If your part falls outside, we'll tell you at quote stage rather than waste your week.
Most shops in WA quote in 5+ working days. Our engineer reviews drawings and prices the same day or next. If the timeline is tight, say so — we'll quote first and qualify second.
Every job carries traceability paperwork on request. EN 10204 type 3.1 mill certs free at order time on 4140, stainless, and bronze. No "compliance package" upcharge.
Single prototypes and 10,000-piece batches run on the same shop floor. Setup amortises sharply past 200 pieces — we'll quote a per-piece curve so you can see the breakeven, not just one number.
STEP, IGES, DWG, DXF, PDF or photos of a worn sample. Upload here or email contact@enexengineering.com.au. No drawing? Send a sample, we'll measure.
Engineer reviews same day. Pricing and lead time back inside 48 hours. If anything's unclear, we phone — not a 4-day email chain.
PO accepted by email. Material traceability and dim reports included. Standard freight to most of WA built into the price.
One part. Enex quotes single prototypes, batches of 50-500, and production runs of 5,000+ on the same shop floor. There is no minimum order.
A typical one-off precision part is in your hands within 5-10 working days from drawing approval. Production runs are quoted with a specific lead time at quote stage.
4140 PG bar (heat-treated), 4140 hollow bar, 316 and 304 stainless, bronze C932 and C954, brass C360, aluminium 6061 and 7075, and E470 Euronorm hollow bar. Other materials sourced on request, typically within five working days.
±0.01mm on routine precision work. Tighter tolerances available via Wire EDM finishing where required.
Yes. EN 10204 type 3.1 mill test certificates are available on request at order time. Material traceability is held on every job — at no extra charge.