d time. Malaga WA.">before 2pm AWST.">
EE036 — Enquire for Availability/ Quote in 24-48 Hours/ Direct-Fit · Machined to Original Spec
Call Now Get a Quote →
EE036 Hanger Rocker Axle Pin — machined E470 hollow bar
// EE036 · Steerable trailer suspension

Hanger Rocker Axle Pin

Direct-fit aftermarket replacement for the hanger rocker axle pin used on heavy-haulage steerable trailers. Machined from E470 Euronorm hollow bar, heat-treated, ends finished and chamfered.

Pricing on request

Quotes returned in 24-48 hours · Volume discounts at 10+

Enquire · Malaga WA
Request quote →

Quote requests typically returned within 24-48 HOURS. Australia-wide freight.

Part number
EE036
Application
Heavy-haulage steerable trailers, 1998–current
Material
E470 Euronorm hollow bar
Dimensions
Confirm at quote stage — cut to your trailer model
Surface finish
Machined ends
Tolerance
±0.02 mm on bearing surfaces
Country of origin
Made in Australia
Lead time
Enquire — confirmed at quote stage
// What this part is

The pin that takes every road bump

The hanger rocker axle pin is the load-bearing pin that lets a steerable trailer's rocker arm pivot. It carries shock loads from every bump in the road straight from the suspension into the chassis hanger. When it wears, the trailer develops a knock at low speed and the bushing (EE037) follows quickly.

Replacement is straightforward: knock the old pin out, press the new bushing in, drop the new pin through. Most shops do it in 30 minutes per axle. We supply the pin alone (this SKU) or as a hanger-pin set with matching bushings — bundle pricing applies.

// Why choose EE036

Why this is the part you want

  • Machined to original equipment spec — direct fit, no rework, no spacer kits
  • E470 hollow bar — same material grade used by original equipment manufacturers
  • Machined in Malaga — enquire for current availability and lead time
// Compatibility check

Does it fit your trailer?

EE036 fits most heavy-haulage steerable trailers built from 1998 onwards. For pre-1998 trailers, or builds with non-standard suspension, send us a photo of your worn pin with a tape measure across the diameter and length. We'll confirm fit by email before you commit.

Email a photo for fit check See all trailer parts
// Related parts

Often ordered together

// Photo to follow
EE035 · Bush

Nylon Rocker Axle Bush

NAT Nylon. Press-fit pair to the rocker axle pin.
// Photo to follow
EE037 · Bush

Nylon Axle Trunnion Bush

Ertralon / Sustamid. Same axle assembly.
// Photo to follow
EE039 · Sleeve

Axle Shaft Sleeve

E470 hollow bar. Often replaced same job.
// Photo to follow
EE040 · Washer

Nylon Axle Trunnion Washer

Nylon. Wear face on the trunnion.
// FAQ

Buyers ask about EE036

Will EE036 fit my steerable trailer?

EE036 is machined to the standard hanger rocker axle pin spec used on most heavy-haulage steerable trailers from 1998 onwards. If unsure, photograph your worn pin with a tape measure across diameter and length and email contact@enexengineering.com.au. We'll confirm fit before you commit.

What's the lead time on EE036?

Lead time varies by current production load. Send the part number and we'll come back with current availability and lead time within 24-48 hours. Australia-wide freight, tracked door-to-door.

Can I order in bulk for a fleet?

Yes. Volume pricing kicks in at 10 units. Bundle pricing on hanger sets (4× EE036 + 4× EE037) at 4-set quantities. Email contact@enexengineering.com.au with your fleet sheet for a tailored quote.

Is the part made in Australia?

Yes. Machined at the Enex workshop in Malaga, Western Australia, from materials supplied via Australian distributors.

Need EE036? Send your part number, we'll come back with lead time.

Request quote →